Daisen PRODUCT SERIES
Series | Model | Numbers of the blades | Voltage | Power | Diameter | Drive mode | Max speed | Max air volume | Max coverage area(m²) | Fit for installation height(m) | Noise level | Net weight |
DS (Gearbox motor) | DS-7.3 | 6 | 220V/380V | 1.5KW | 7.3M (24FT) | Gearbox motor drive | 50RPM | 888000m3/h | 1200 | 7~18 | ≤60db | 156kg |
DS-6.7 | 6 | 220V/380V | 1.5KW | 6.7M (22FT) | Gearbox motor drive | 52RPM | 822000m3/h | 1000 | 6~15 | ≤60db | 152kg |
DS-6.1 | 6 | 220V/380V | 1.5KW | 6.1M (20FT) | Gearbox motor drive | 55RPM | 774000m3/h | 800 | 6~13 | ≤60db | 147kg |
DS-5.5 | 6 | 220V/380V | 1.5KW | 5.5M (18FT) | Gearbox motor drive | 60RPM | 732000m3/h | 600 | 5~11 | ≤60db | 143kg |
DS-5.0 | 6 | 220V/380V | 1.5KW | 5.0M (16FT) | Gearbox motor drive | 65RPM | 690000m3/h | 450 | 5~9 | ≤60db | 140kg |
DX (PMSM motor) | DX-7.3 | 6 | 220V | 1.5KW | 7.3M (24FT) | brushless direct drive | 50RPM | 888000m3/h | 1200 | 7~18 | ≤38db | 106kg |
DX-6.7 | 6 | 220V | 1.2KW | 6.7M (22FT) | brushless direct drive | 55RPM | 822000m3/h | 1000 | 6~15 | ≤38db | 100kg |
DX-6.1 | 6 | 220V | 1.0KW | 6.1M (20FT) | brushless direct drive | 60RPM | 774000m3/h | 800 | 6~13 | ≤38db | 94kg |
DX-5.5 | 6 | 220V | 0.75KW | 5.5M (18FT) | brushless direct drive | 65RPM | 732000m3/h | 600 | 5~11 | ≤38db | 72kg |
DX-5.0 | 6 | 220V | 0.7KW | 5.0M (16FT) | brushless direct drive | 68RPM | 690000m3/h | 450 | 5~9 | ≤38db | 68kg |
DX-4.2 | 5 | 220V | 0.6KW | 4.2M (14FT) | brushless direct drive | 75RPM | 636000m3/h | 300 | 4~7 | ≤38db | 64kg |
DX-3.6 | 5 | 220V | 0.3KW | 3.6M (12FT) | brushless direct drive | 90RPM | 393600m3/h | 250 | 4~6 | ≤45db | 42kg |
DX-3.0 | 5 | 220V | 0.2KW | 3.0M (10FT) | brushless direct drive | 100RPM | 331800m3/h | 200 | 4~5 | ≤45db | 38kg |
DX-2.4 | 5 | 220V | 0.15KW | 2.4M (8FT) | brushless direct drive | 100RPM | 273000m3/h | 200 | 4~5 | ≤45db | 34kg |
DX series (PMSM motor)
Air volume up to 888,000 m³/h, fan diameter 7.3m, 6 fan blades,
6063T6, operating speed 5-55RPM (controlled by stepless inverter),
net weight 106kg, wind speed 1-4m/s; coverage area up to 1200m2
(installation height 10m). The rated power is 1.5KW, and the noise
value is less than 38dB.
DS series (gearbox motor)
Air volume up to 888,000 m³/h, fan diameter 7.3m, 6 fan blades,
6063 T6 heat treatment, operating speed 20-55RPM (controlled by
stepless inverter), net weight 126kg, wind speed 1-3m/s; coverage
area up to 1200m2 (installation height 13m). The rated power is
1.5KW, and the actual test average power is 1.2KW. The noise value
is less than 60dB.
Comparison of three refrigeration methods in 1000 square meter
plant
Refrigeration mode | Quantity | Power/unit | Tall power | General comparison |
Central air conditioner | 1 | 80KW | 80KW | The walls, doors and windows of the factory need to be insulated.
The one-time investment cost of equipment is high, and the
maintenance cost of replacing filter element and adding refrigerant
is high |
Traditional industrial fan | 40 | 0.3KW | 12KW | The installation of traditional wall fans is limited by walls and
columns. The power cords of floor fans are relatively scattered,
which poses a safety hazard. It is not safe for the staff's hair to
be mixed into the fan blades, the fan blades take up little space
and have a short service life |
7.3M HLVS industrial ceiling fan | 1 | 1.5KW | 1.5KW | Large coverage area, long service life, low maintenance cost,
installation does not occupy the workshop space, safety and
environmental protection |
The energy consumption of large industrial ceiling fan is about 1 /
50 of that of central air conditioner and 1 / 10 of that of
traditional industrial wall fan
Application space of productIndustrial large-scale fan technology originated in the United
States, which is the most direct and effective way to solve the
problem of ventilation and cooling in high-rise spaces.
Localization has been widely used in various industries.
At present, Damori industrial large-scale fans are widely used in:
4-20m high processing plants, warehousing and logistics, indoor
stadiums, gyms, station shopping malls, breeding and other places.
The HVLS industrial fan independently developed by the company has
been widely used in military, aerospace, automobile manufacturing,
Chinese automobile manufacturing, equipment manufacturing, general
electrical appliances, food processing, logistics transportation,
home manufacturing, indoor dome, large-scale breeding and other
industries, not only in schools, etc. It is also suitable for
industrial places, churches and other places. At the same time,
according to customer needs, our company can also carry out private
customization on the basis of the original fan, such as adding
lighting, equipped with temperature control equipment, etc.
FAQ
Q:Are you a foreign trade company or a manufacturer ?
A: We are a manufacturer in China, and our factory is specialized
in HVLS industrial ceiling fan, cooling fan ,exhaust industrial fan
and so on.
Q: Can you make my brand on products or provide OEM service?
A: Yes.We provide OEM service.We are the OEM supplier for some
famous companies.
Q: What's your minimum quantity for order (MOQ)?
A: 1pcs.
Q: what's the delivery time?
A: It depends on the order quantity. Normally,delivery time will be
within 3 days after receiving payment by TT.
Q: What is your terms of payment ?
A: Payment ≤10000USD, 100% in advance.Payment≥10000USD, 30% T/T in
advance, balance before shipment.
Q: How long is the warranty?
A: we offer 3 years warranty to guarantee the quality for global
customers.